EzGIG
Contact
EzGIG
Computer vision

Zero harm starts with seeing every near miss.

EzVision for Manufacturing

Book a 20-min call

Near misses go unreported

EzVision is an AI factory safety system that watches lines, aisles and loading bays for missing PPE, forklift near misses, danger-zone entry, fire risks and line stoppages, on the plant cameras you already have. Footage is processed on servers inside your plant, so EHS, operations and quality teams fix the cause before someone gets hurt.

  • Near misses go unreported, and EHS teams find out about unsafe acts only after an injury.
  • Forklift-pedestrian and suspended-load incidents are the most serious risks on the floor.
  • PPE rules slip across shifts and contractors, and stoppages are found late.
How EzVision works across industries
Availableon your own plant cameras

Safety rules and line status

PPE, vehicles, hazards and operations, set per area and shift.

50 cameras per EzVision server
See the full detection library

People

PPE by type and areaRestricted and exclusion zonesMachine-guard breachMan-down and fallsLone worker after hours

Vehicles

Forklift speedForklift and pedestrian proximityReversing without a spotterGate plates and loading-bay vehicles

Safety

Fire and smokeSpills and leaksBlocked emergency exitsOverheating equipment (thermal)Worker under suspended load

Operations

Line stoppageIdle stationsCycle and product countsPallet countsSOP step complianceDefect, label and seal checks

Capture. Detect. Act.

From the plant camera to the supervisor’s phone, on every shift.

  1. Capture

    Existing plant cameras and thermal, with radar for dusty or hot zones.

  2. Detect

    Unsafe acts and stoppages recognised in real time.

  3. Act

    Supervisor alerted, machine interlocks where you allow it, and a weekly safety report.

Supervisor alerted in real time

Who gets which alert

PPE compliance

Hard hat, vest, gloves, glasses, hairnet: whatever your zone requires.

Alert goes to: Line supervisor

Forklift-pedestrian proximity

Catches near misses between forklifts and people.

Alert goes to: EHS and warehouse lead

Danger zone entry

Flags anyone entering a robot cell, press or machine zone.

Alert goes to: Supervisor or machine stop

Worker under suspended load

Spots people under a crane or hoist load.

Alert goes to: Crane operator and EHS

Defect, label and seal check

Visible defects, wrong labels and open seals on the line.

Alert goes to: Quality lead

Fire, smoke and thermal hotspots

Early warning before a fire alarm triggers.

Alert goes to: Facility and ERT

What changes on the floor

Three moments from a shift, and the before and after.

Shift change: a contractor walks onto the floor without safety glasses. The supervisor gets an alert.

A forklift reverses within a metre of a picker. The near miss is logged with a clip for the toolbox talk.

A motor housing starts overheating on Line 3. Maintenance is alerted before smoke appears.

Logged for the toolbox talk
BeforeWith EzVision
Near misses unreportedEvery near miss logged with a clip
Monthly safety walksEvery camera checked every second, every shift
Defects found by customersDefects, labels and seals checked on the line
Fire found by the alarmSmoke and hotspot alerts before the alarm

Sensors used in plants

Cameras on the floor, thermal for heat, radar where dust or heat blinds a camera.

CCTV camera

CCTV

Existing plant and line cameras.

Thermal camera

Thermal

Overheating motors and early fire warning.

60GHz radar sensor

60GHz radar

Dusty or hot zones where cameras struggle.

IoT sensor

Gas, smoke and PLC signals

Sensors and machine signals feed the same engine.

Works with what you already run

Existing CCTVLine and inspection camerasThermal camerasGas, smoke and heat sensorsMachine interlocks and PLCsEHS, MES and permit-to-work systems

Footage stays in your plant

Detection runs on servers inside the factory, and detections are about safety behaviour, not individual performance.

  • Detection runs on GPU servers at your site
  • Nothing has to leave your network
  • Access by role, and every view logged
  • Retention set per site
  • Plates and faces anonymised in anything published
  • You choose whether clips name anyone
Network ports on an on-site server
100% on your premises

Start with a trial

A site visit, a trial on your own cameras, then a results review.

Available
  • A trial on a few cameras can go live in weeks once cameras are connected
  • Footage processed on servers inside your plant
  • Rules set openly with your team, per area
  • The same engine reads plates on live toll gantries and car parks
See VERA, live on the LATAR Expressway
EzVision camera mounted on site
Weeks to a live trial

Three steps, on your own cameras

  1. Site visit

    We walk the site, check your cameras and agree the detections that matter most.

  2. Trial on your own cameras

    EzVision runs on a few of your cameras, on a server at your site.

  3. Results review

    We go through every alert with your team, then plan the roll-out.

50cameras per EzVision server
On-siteGPU server on your own network
ExistingIP cameras work in most cases

Questions about factory safety

No. It is processed on servers inside your plant.

  1. Liftoff

    Book a slot or send a quick brief. A real person on our team replies within one working day.

  2. Mission briefing

    A focused call on your goals, systems and site. We tell you straight what will work, and what won't.

  3. Flight plan

    A clear written plan shaped around your needs, with a fixed price and timeline. No surprises.

Ask EzGIG