EzGIG
Contact
EzGIG
Computer vision

Every unsafe act on site, caught before it costs a life.

EzVision for Construction

Book a 20-min call

Safety officers can’t be everywhere

EzVision is an AI construction site safety system that watches for missing PPE, unsafe work at height, workers near machinery and intruders after hours.

It runs on site cameras including solar and 4G units, drones and thermal, and gives contractors and developers safety reports by zone, contractor and week.

  • Falls from height, struck-by and caught-between incidents are still the top killers on site.
  • Sites change daily, and manual safety walks miss most unsafe acts.
  • Materials and equipment walk off site at night, and clients want auditable safety proof.
How EzVision works across industries
A construction site at dusk with a tower crane and scaffolding
Availablesolar and 4G cameras supported

The whole site, day and night

People, machines, hazards and progress, set by zone as the site changes.

50 cameras per EzVision server
See the full detection library

People

PPE and harnessExclusion zonesWork near unprotected edgesWorkers under suspended loadsWorkers near moving machineryHeadcount per zone

Vehicles

Site vehiclesGate platesExcavator and crane swing radiusReversing

Safety

After-hours intrusion and theftFire and smoke (thermal)Hot worksEntry into open excavationsMan-down

Operations

Daily site imageryProgress against plan from drone flightsStockpile volume (drone)Housekeeping

From site camera to safety officer

Every alert carries the clip, the zone and the person who should act.

  1. Capture

    Site cameras including solar and 4G units, drone flights and thermal.

  2. Detect

    Unsafe acts and intruders flagged, by zone.

  3. Act

    Supervisor alerted; clips kept for safety reviews and weekly client reports.

PPE compliance

Hard hat, vest, harness, boots: by zone.

Alert goes to: Safety officer

Working at height without harness

Flags workers at edges and on scaffolds unclipped.

Alert goes to: Safety officer

Heavy machinery proximity

Catches workers inside an excavator or crane swing zone.

Alert goes to: Operator and supervisor

Danger zone and open edge entry

Flags entry into exclusion zones and unprotected edges.

Alert goes to: Supervisor

After-hours intrusion and theft

Spots intruders and material theft at night.

Alert goes to: Security and site manager

Fire, smoke and hot work

Early warning of fire, and hot work without a fire watch.

Alert goes to: Site manager

What changes on site

Three moments from a site day, and the before and after.

Morning start: three workers enter Zone B without hard hats. The safety officer gets the clip.

A worker steps into the excavator’s swing radius. The operator and supervisor are alerted.

A van pulls up by the rebar store. Security gets the alert before anything is loaded.

Operator and supervisor alerted
BeforeWith EzVision
Unsafe acts spotted on a site walkEvery camera checked all day
Near misses never recordedEach one logged with a clip for the toolbox talk
Safety proof built from paperworkReports by zone, contractor and week
Theft discovered in the morningLive intrusion alerts at night

Sensors used on site

Temporary cameras, drones and thermal, with no wired network needed.

CCTV camera

Solar and 4G cameras

Site cameras that need no wired network.

A survey drone flying over a construction site

Drone

Daily imagery, progress and stockpile volume from above.

Thermal camera

Thermal

Darkness, smoke and hot works.

IoT sensor

Gas, dust and noise

Site sensors feed the same alerts.

Works with

Existing site CCTVSolar and 4G camerasGas, dust and noise sensorsAccess turnstiles and attendanceSafety management systems

Start with a trial

A site visit, a trial on your own cameras, then a results review.

  • Solar and 4G cameras with processing on site
  • Zones redrawn in minutes as the site changes
  • Reports by zone, contractor and week
  • Clips kept for safety reviews and toolbox talks
See our past work
Available3 steps, on your cameras

Three steps, on your own cameras

  1. Site visit

    We walk the site, check your cameras and agree the detections that matter most.

  2. Trial on your own cameras

    EzVision runs on a few of your cameras, on a server at your site.

  3. Results review

    We go through every alert with your team, then plan the roll-out.

50cameras per EzVision server
On-siteGPU server on your own network
ExistingIP cameras work in most cases

Footage stays on your site

Processing runs at the edge on site, and alerts focus on unsafe acts and zones.

  • Detection runs on GPU servers at your site
  • Nothing has to leave your network
  • Access by role, and every view logged
  • Retention set per site
  • Plates and faces anonymised in anything published
  • You decide whether reports name individuals or contractors
Network ports on an on-site server
100% on your premises

Questions about construction sites

Yes, including solar and 4G units, with edge processing on site when there is no wired network.

  1. Liftoff

    Book a slot or send a quick brief. A real person on our team replies within one working day.

  2. Mission briefing

    A focused call on your goals, systems and site. We tell you straight what will work, and what won't.

  3. Flight plan

    A clear written plan shaped around your needs, with a fixed price and timeline. No surprises.

Ask EzGIG